Ip66 / Nema4X Protection - Eaton PowerXL DA1 Series Installation Manual

3.4 IP66 / NEMA4X protection

IP66 DA1 variable frequency drives are available in two versions:
• DA1-...-A66C: Controlled via control signal terminals
• DA1-...-A6SC: Controlled with controls on the front and/or
control signal terminals
DA1-...-A66C
Figure 53: IP66 variants
The units must be mounted, with four screws and in a vertical position, on a
wall or panel that is made of nonflammable material and is stable enough to
hold the variable frequency drive's weight.
FS2, FS3 = 4 x M4
1 Nm (8.85 lb-in)
Figure 54: Openings for fixing screws
DA1 Variable Frequency Drives 08/18 MN04020005Z-EN www.eaton.com
3.4 IP66 / NEMA4X protection
0
REV
FW D
PW R OFF
ON
DA1-...-A6SC
3 Installation
89