Ip66 Protection (Fs2, Fs3) - Eaton PowerXL DA1 Series Installation Manual

1 DA1 device series
1.5 Designation

1.5.4 IP66 protection (FS2, FS3)

28
The following drawing serves as an example showing the designation used
for the elements in DA1 variable frequency drives with a frame size of FS2
and IP66 protection.
⑪
Figure 13: DA1 designation (here: FS2, IP66)
a Local controls on DA1-...-B6SC
b Operating unit with 5 control buttons and OLED display
c Control and relay terminals (plug-in)
d Connection terminals in power section grommet for EMC cable gland
e Rating plate
f Fixing holes
g Heat sink
h Connection terminals in power section and grommet for cable gland
i Slot for fieldbus connection or expansion module
j Communication interface (RJ45)
k Cover
The info cards ⑪ are located inside the lower enclosure cover, which
features three knockouts for cable glands to the control section.
DA1 Variable Frequency Drives 08/18 MN04020005Z-EN www.eaton.com
⑩
⑨
⑧
⑦
①
②
③
④
⑤
⑥