Eaton PowerXL DA1 Series Installation Manual page 106

3 Installation
3.6 Electrical Installation
102
￫
The upper edge of this cover is inserted into the upper
enclosure cover from below.
The connection cables need to be brought in from below. To do this on these
frame sizes (FS4 to FS7), the cover at the bottom (above the device fan)
needs to be removed.
1
PZ 2
1 Nm
(8.85 lb-in)
Figure 64: Remove the blanking plate
Unscrew the screws (six pcs. / eight pcs.) [1] and remove the blanking plate
[2].
Table 8: Connection terminals (FS4, FS5)
Description
Connection with three-phase
supply voltage:
• DA1-32... (200 - 240 V)
• DA1-34... (380 - 480 V)
• DA1-35... (500 - 600 V)
L1 L2 L3
L1 L2 L3 PE
Figure 65: Connection terminals for sizes FS4 and FS5
DA1 Variable Frequency Drives 08/18 MN04020005Z-EN www.eaton.com
2
optional: internal or
external braking resistor
(R )
B
+DC BR -DC U
R
B
3 ~
Connection for three-phase motors
(motor voltage = supply voltage)
V W
PES
M