Designation; Ip20 Protection Ip20 (Fs2, Fs3, Fs4, Fs5) - Eaton PowerXL DA1 Series Installation Manual

1.5 Designation

1.5.1 IP20 protection IP20 (FS2, FS3, FS4, FS5)

The following drawing serves as an example showing the designations used
for the elements in DA1 variable frequency drives with a frame size of FS2
and IP20 protection.
①

DC -
L1 /L L2 /N
L3
⑩
⑨
CO M
⑧

DC + BR
U
V
W
⑦
⑥
Figure 8: DA1 designations (here: FS2, IP20)
a Fixing holes (screw fastening)
b Connection terminals in power section (mains side)
c Cutout for mounting on mounting rail
d Control signal terminals (plug-in)
e Relay terminals (plug-in)
f Connection terminals in power section (motor feeder)
g Slot for fieldbus connection or expansion module
h Communication interface (RJ45)
i Keypad with 5 control buttons and LED display
j Info card
DA1 Variable Frequency Drives 08/18 MN04020005Z-EN www.eaton.com
②
③
④
⑤
1 DA1 device series
1.5 Designation
25