In devices with IP55 protection (frame sizes FS4 to FS7), the blanking plates
(→ figure 78) have three locating points for individual diameters for cable
ducts. In order to have an installation that meets EMC requirements, the
metal stud on this blanking plate must be connected to the enclosure's
PE/earthing connection.
Figure 78: Blanking plate (FS6, FS7) with locating points and earthing stud
→
On frame sizes FS4 and FS5, the equipment supplied includes a
second blanking plate with three openings in addition to the
solid blanking plate that comes already installed.
D43
D42
Figure 79: Blanking plate with openings and earthing stud (FS4, FS5)
Table 14: Openings (FS4, FS5)
Frame size
D41
mm (in)
FS4
40.5 (1.59)
M40
FS5
50.5 (1.99)
M50
DA1 Variable Frequency Drives 08/18 MN04020005Z-EN www.eaton.com
l
D41
D42
D43
mm (in)
mm (in)
25.5 (1)
40.5 (1.59)
M25
M40
25.5 (1)
50.5 (1.99)
M25
M50
3.6 Electrical Installation
⌀
l
⌀
mm (in)
10 (0.35)
M4
18 (0.71)
M6
3 Installation
111