Eaton PowerXL DA1 Series Installation Manual page 20

1 DA1 device series
1.4 Rated operational data
16
The inscription of the rating plate (from ￫ figure 5) has the following
meaning (example):
Inscription
DA1-124D3FB-A20C
Input
Output
Serial No.:
IP20
S/Ware
08112013
Max. Amb. 50 °C
a
DA1 Variable Frequency Drives 08/18 MN04020005Z-EN www.eaton.com
Meaning
Part no.:
DA1 = DA1 series variable frequency drive
1 = Single-phase mains connection / three-phase motor connection
2 = Mains voltage category 230 V
4D3 = 4.3 A rated operational current (4-decimal point-1, output current)
F = Integrated radio interference suppression filter
B = Integrated brake chopper
A = LED display (7-segment text display)
20 = IP20 protection
C = PCB protection (coated board)
Rated operational data of mains connection:
Single-phase AC voltage (U 1~ AC)
e
Voltage 200 - 240 V, frequency 50/60 Hz, input phase current (11 A)
Load side (motor) rated operational data:
Three-phase AC voltage (0 - U
e
Output frequency (0 - 500 Hz)
Rated motor output:
0.75 kW at 230 V/1 HP at 230 V for a four-pole, internally or surface-cooled three-
-1
phase motor (1500 min at 50 Hz/1800 rpm at 60 Hz)
Serial number
Housing protection type: IP20, UL (cUL) Open type
Software version (1.20)
Manufacturing date: 11/8/2013
Maximum permissible ambient air temperature (50 °C)
Frequency converters are electrical equipment.
Read the manual (in this case MN04020005Z-EN) before making any electrical
connections and commissioning.
) output phase current (4.3 A),