Eaton PowerXL DA1 Series Installation Manual page 108

3 Installation
3.6 Electrical Installation
3.6.1.3 Terminal bolts on frame size FS8 (IP20)
104
On FS8 DA1 variable frequency drives, the connection area inside the power
section will be covered by a blanking plate at the bottom of the enclosure. In
order to open it, you will need to unscrew six screws [1].
1
PZ 2
Figure 67: Remove the blanking plate
Table 10: Terminal bolts (FS8)
Description
Connection with three-phase
supply voltage:
• DA1-34... (380 - 480 V)
L1 L2 L3 +
PE L1 L2 L3
Figure 68: Terminal bolts on frame size FS8
The PE earthing connection is made with ring cable lugs and the bolts on the
right side.
￫
Stud terminal + has the same function as terminal DC+.
DA1 Variable Frequency Drives 08/18 MN04020005Z-EN www.eaton.com
2
optional: External braking
resistor (R )
B
BR U V W
R
B
M
3 ~
Connection for three-phase motors
(motor voltage = supply voltage)
PES