Eaton PowerXL DA1 Series Installation Manual page 139

Table 18: Keypad elements – Buttons
Button Command
OK
START
STOP
UP
DOWN
Notes:
1) P1-12 = 1 (one operating direction) or P1-12= 2 (two operating directions);
The operating direction will be reversed when the START button is pressed
2) Only if P1-12 = 2
DA1 Variable Frequency Drives 08/18 MN04020005Z-EN www.eaton.com
Explanation
• Navigating in parameter mode
• Opens and closes the parameter interface(press the button and hold
it down for more than two seconds)
• Saves parameter changes
• Changes the value being displayed: A, rpm, etc.
(real-time information)
• Starts the variable frequency drive
• Changes the operating direction
• Stops the variable frequency drive
• Reset – Resetting after an error message
1)
• Increases the speed
• Increment numeric value or parameter number
1)
• Deceleration
• Decrement numeric value or parameter number
4 Operation
4.4 Using the operating unit
1)
2)
if the motor is running
1)
135