Position Of Installation; Cooling Measures - Eaton PowerXL DA1 Series Installation Manual

3.3.1 Position of installation

3.3.2 Cooling measures

The DA1 device series variable frequency drives are installed vertically.
The maximum permitted tilt is 30°.
≦ 30º
≦ 30º
≦ 30º
Figure 43: Position of installation
In order to guarantee sufficientair circulation, enough thermal clearance must
be ensured according to the frame size (rating) of the frequency inverter.
b
 DC- L1/L L2/N L3  DC-
a
1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6
COM COM
14 15 16 17 18
 
DC+ BR U V W DC+ BR
Figure 44: Clearances forair cooling (left: IP20; right: IP66)
￫
The variable frequency drives can be mounted side by side
without any lateral clearance between them.
DA1 Variable Frequency Drives 08/18 MN04020005Z-EN www.eaton.com
≦ 30º
L1/L L2/N L3
a
a
7 8 9 10 11 12 13
14 15 16 17 18
U V W
3 Installation
3.3 Assembly
b
0
REV FWD
a
OFF
PWR
ON
81