Configure Application Tool - Keysight M9290A Getting Started And Troubleshooting Manual

Launching Modular SA Application

Configure Application Tool

Configure Application Tool
The program ConfigureApplications.exe on the desktop allows you to configure
certain behaviors of the applications (Modes). When this program runs, it affects the
behavior at Modular SA application startup. If you run it while the Modular SA
application is running, it will take effect the next time the Modular SA application
starts up.
Double-click on this icon Configure Applications.exe, the following dialog pops up:
Follow the instructions in this dialog to configure your applications as desired.
For multiple instances of the Modular SA Application on the same
computer/controller, the same Configure Applications Utility is shared between all
the instances, the same application configuration will be used on each application
instance. The required memory shown on the panel is just for one Modular SA
Application instance.
The Spectrum Analyzer Measurement Application is standard for M9290A without license
NOTE
required. Additional measurement applications are available. Each application requires a
license to execute the software.
36