ASCOM Ascotel 2025 System Manual page 582

Detailed Description
Tab. 2.265: Switching switch groups
Inter- Operating sequence / signalling on the terminal Scope
face
A • The subscriber obtains an acknowledgement
tone when switching On / Off.
• Terminals connected to the S-bus cannot dis-
play the status of switching groups 2 to 9.
• System terminals: The switching status is dis-
played by the status of the LED or the corre-
sponding symbol on the display for the func-
tion key configured accordingly.
Tip:
The significance of the switching states can be seen from the designa-
tion labels created individually for each subscriber.
External switches:
Switching group 1 can also be activated via 2 control inputs on the PBX exchange,
e.g. via preconfigured time-switch clock.
External switches have a higher priority, i.e. they must be open (status 0) so that
switching via function key or procedure can be carried out.
Prefix Dialling Procedures
Tab. 2.266: Switching switch groups: Procedure
Switch switching group x in position y
x = 1...9 :
y = 1, 2 or 3
System Configuration
Tab. 2.267: Switch groups: System configuration
Parameter
Operate switch group
Switch group
HBT_20321104_02/B0_en
*/# procedure
*85xy (x = 1...9, y = 1..3)
Parameter value
yes
Switch position of switch group 1 to 9
ascom Ascotel 2025/2045/2065
Possible interfaces:
The switch groups are operated locally on the
system.
Remarks
Subscriber configuration
Display
Features 2.405