[1] Dimensions of the basic system 2025 / 2045
[2] Dimensions of the basic system 2065
Fig. 4.3:
Drilling template
To mount the basic system on a wall, proceed as follows:
1. Mark out the position of the 4 screws in accordance with the drilling template
(Fig. 4.3).
2. Fit the screw dowels. Take note of the weight and technical data (see "Basic
Systems", Page 8.11).
3. Fit the upper suspending screws.
4. Suspend the PBX housing onto the suspending screws, with the mainboard
preinstalled and the cover open.
5. Use the screws to secure the lower half of the housing to the wall.
6. Fit the cover.
HBT_20321104_04/B0_en
[2]
345
[1]
220
[1]
260
[2]
385
ascom
Ascotel 2025/2045/2065
390
Mounting the PBX
4 mm
4.5