ascom
Ascotel 2025/2045/2065
8.2
Call Diversion Functions
8.2.1
Call Diversion
Calls intended for B are diverted to destination C.
Fig. 2.160: Call diversion
Call diversion responds differently depending on the system configuration and the
procedure used. The various call diversion types are as follows:
• Call diversion to a variable destination:
The subscriber specifies the chosen diversion destination on his terminal. This
call diversion can be either unconditional or only if busy.
• Predefined call diversion:
The diversion is made unconditionally to a destination entered in the subscriber
configuration. This destination is also used with the Leave message feature if
the caller is unable to read messages on his terminal.
• Call diversion if unobtainable:
Where a call is to be diverted to in the event of unavailability can be defined
for DECT handsets in system configuration.
Note:
The unconditional diversion to a preconfigured destination can be over-
written with *67 procedure (see Tab. 2.126).
2.306
Features
B
haz0217aaxxb0
A
C
HBT_20321104_02/B0_en