Procedure For Remote Access - ASCOM Ascotel 2025 System Manual

4.2

*/# Procedure for Remote Access

Tab. 5.5: */# procedure for remote access authorization
Enable / bar a one-off remote access
Enable / bar a permanent remote access
When remote access is enabled using procedure *754, access will automatically
be barred again once the remote configuration process has been completed. It is
possible to bar access manually using #754 before a remote configuration process
has been initiated.
Remote access can be enabled permanently using the procedure *753. To bar
access, the authorized subscriber must enter the procedure #753 manually.
The enabling or barring of remote access authorization using the */# procedure
is signalled in each case by an acknowledgement tone.
Remote access authorization can also be enabled or barred in the AIMS Configu-
ration Manager under the Attendant authorization level.
HBT_20321104_05/B0_en
ascom Ascotel 2025/2045/2065
*754 / #754
*753 / #753
Enabling Remote Access 5.19