Other Functions And Settings Of The Cde - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065
4.4.4

Other Functions and Settings of the CDE

Name
"Name" is used to provide each call distribution element with a name. The name
is used for identification purposes.
• With incoming calls it is displayed on the system terminal.
• With outgoing calls via KT lines it is provided as CNIP.
The name cannot be used for dialling by name.
Displaying DDI
With incoming calls the direct dialling number can also be displayed instead of the
name of the call distribution ("DDI instead of CDE name = yes"). This is needed
for CTI applications in particular.
Activating / Deactivating Incoming Call Logging (ICL)
Incoming call logging can be activated or deactivated for each call distribution ele-
ment (see Page 2.241).
Specifying the Company Configuration
The "Company" setting specifies whether or not the call distribution element is
to be used in a two-company configuration (see "Two-Company System",
Page 2.96).
Courtesy
A Courtesy group can be allocated to each call distribution element; likewise
Courtesy can be deactivated for each element (see Page 2.395).
KT Cost Centre
Call charges for calls via the KT lines of a call distribution element are logged at
the cost centre entered under "KT cost centre" (see also Page 2.106).
Other Subjects Relating to Call Distribution:
Trunk group, Direct dialling plan, User group, key telephones, Subscriber
configuration, Internal traffic, Incoming traffic, Outgoing traffic, Traffic
in the PISN, key telephones, Switching groups, Numbering plan.
2.76 Routing Elements HBT_20321104_02/B0_en