Updating Passwords; Access Via The Hex Rotary Switch On The Mainboard; Automatic Exit From The Configuration - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065
3.1.3

Updating Passwords

Any password on any given authorization level can be replaced by a new pass-
word on that same level.
If a password on levels 1 to 3 is lost, it is possible to log into the configuration
locally using the password-free access via the HEX rotary switch – see below – and
then configure a new password.
The password for authorization level 4 can only be changed using Maintenance
AIMS.
3.2

Access via the HEX Rotary Switch on the Mainboard

The HEX rotary switch on the mainboard provides a password-free local access to
the menus of authorization level 3.
• Allow access:
Turn HEX rotary switch to 5.
• Bar access:
Turn HEX rotary switch back to 0 (or 2 or B).
There is no password-free access for remote maintenance.
3.3

Automatic Exit from the Configuration

The PBX will interrupt access to the system configuration if you do not make any
changes to a parameter value or do not make use of the navigation system during
the set disconnect time ("View: Options" under "Online Connections").
5.14 Enabling Local Access HBT_20321104_05/B0_en