4.10.3 Outgoing Calls Via A Kt Line - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065

4.10.3 Outgoing Calls via a KT Line

A KT line can be configured either as an outgoing line to the network or as a nor-
mal internal line.
KT Line as an Outgoing Line to the Network
Direct network access is enabled when a call is set up: The network dialling tone
is obtained. This means the subscriber does not have to dial an exchange access
prefix to be able to dial out into the public network. The route is determined by
the "KT route" setting in the call distribution element.
If the call number dialled is a number with an exchange access prefix and a
hyphen.
Example:
The display on the key telephone indicates CLIP number: 0-222 30 30. If an out-
going call is initiated by dialling this number, the number 222 30 30 is dialled and
the call is transmitted to the public network via the configured KT route.
To enable outgoing calls to the public network, "Indirect exchange access = No"
must be set in the key telephone configuration. The setting "Indirect exchange
access = Yes" does not enable outgoing calls to be set up via this KT line.
The call charges can be logged via the "KT cost centre" setting.
2.106 Routing Elements HBT_20321104_02/B0_en