Routing Functions For Outgoing Calls - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065
4.8.2

Routing Functions for Outgoing Calls

Routing an Outside Call
Seizing a line key enables direct network access and the network dialling tone is
obtained. This means the subscriber does not have to dial an exchange access pre-
fix to be able to dial out into the public network.
Calls are routed via route 1 except in the case of a two-company configuration
(see "Two-Company System", Page 2.96).
With outgoing calls via the line keys the CLIP transmitted consists of the DDI
number that is linked with the switching centre.
If a call number from the display or from a card file is preceded by an exchange
access prefix with a hyphen, the prefix is truncated when dialling via a line key.
Example:
The display on the Operator Console indicates the number: 0-222 30 30. If a call
is set up with this number via a line key, the number 222 30 30 is dialled and the
call is transmitted to the public network via route 1.
Routing an Internal Call
Internal calls (on the Office 45 calls set up via the house key) are routed in the
same way as an ordinary internal subscriber.
The CLIP consists of the personal internal subscriber number.
Routing a Personal Call (Internal or External)
The personal part of an Operator Console corresponds to an ordinary internal
user. The calls are routed accordingly.
The CLIP consists of the personal internal subscriber number.
HBT_20321104_02/B0_en Routing Elements 2.95