ASCOM Ascotel 2025 System Manual page 423

ascom Ascotel 2025/2045/2065
Number of Output Devices
Up to 4 printers or output devices can be connected to the system. Various com-
binations are possible if more than one printer is connected to the system, for
example:
• 4 output devices on Pocket Adapters
• 2 printers on Pocket Adapters, 2 printers on the basic system
If only 1 output device is connected, it will carry out all the output jobs. Under
normal circumstances it handles the "CL printer" jobs for ICL and OCL output. If
the output is triggered from somewhere else the output type is altered at short
notice. Each new output job starts on a new page. If a "CL printer" job is followed
by an "Event printer" job, the new job will be separated by a line of asterisks *. If
the printout of the new job is to begin on a new page, a manual printer formfeed
is to be performed beforehand.
Output when used in a Hotel
When determining the output concept, remember to take note of the comments
in "Menu and Operating Concept with AIMS", Page 2.425.
Setting the Page length
In principle, the page length can be set individually for all output types. If, how-
ever, only one output device is connected, the page length set for "Service
printer" output type will apply.
2.246 Call Logging (CL) HBT_20321104_02/B0_en