Testing Outgoing Traffic to the Public Network
1. Set up an external connection from a PINX using an exchange access prefix (0
in this example).
2. Check the display on the terminal.
3. Test the overflow routing to the public network, proceed as described above.
Testing Incoming Traffic from the Public Network
1. Set up a connection from the public network to subscribers in the PISN.
2. Check the display on the terminal of the PISN subscribers.
3. Repeat the test with numbers which are meant to ring with a delay on the
Operator Console OC.
3.8.2
PISN with Virtual Networking
Fig. 6.2:
PISN with virtual networking
HBT_20321104_06/B0_en
ascom
PISN
PINX 1
PINX 2
PINX 3
haz0754aadeb0
Ascotel 2025/2045/2065
GSM
Function Check
6.15