ASCOM Ascotel 2025 System Manual page 164

Upload
During an upload via the AIMS Shell all the PBX data is written from the AIMS
database into the PBX.
During a data upload the PBX is automatically prebarred and then automatically
released once the operation is completed. The progress of the upload operation
is indicated by a progress indicator bar in a window.
An upload is carried out in the following cases:
• Putting a new system into operation.
• Restoring a system if the configuration has been lost.
• Replicating a special configuration, e.g. copying customer data to a different
system.
Note:
A restart will be carried out automatically once the upload is completed.
Any existing telephone connections will be disconnected.
Partial Upload
The Partial Upload function is used to load the following data from the PC's main
memory on to the PBX.
• Abbreviated dialling numbers
• PISN subscriber data
• Terminal data (individual subscribers or block by block)
• LCR (Least Cost Routing) data
With a partial upload, configuration data that changes frequently can be trans-
ferred more quickly into the system.
Note:
A partial upload is only followed by a restart and disconnection of exist-
ing phone connections if system data is loaded up onto a PBX. In this
case the system generates an appropriate message.
HBT_20321104_01/B0_en
ascom
Ascotel Information Management System AIMS
Ascotel 2025/2045/2065
1.109