System Limits - ASCOM Ascotel 2025 System Manual

Tab. 2.294: Alarm commands
Send alarm commands from
alarm source to subscriber
Send confirmation to subscriber
that his acknowledgement of the
alarm has been accepted
Delete sent alarms from receiver's
phone
Tab. 2.295: Receive user reactions from subscribers on alarm source
A subscriber reads the alarm
received.
A subscriber acknowledges the
alarm received.
A subscriber deletes the alarm
received.
8.8.5

System Limits

The following system limits must be observed:
• Max. length of alarm message texts is 84 characters.
• A maximum of 16 alarms can be stored per subscriber; any additional alarms
will be lost.
• When the storage location is full, the oldest messages are overwritten first, fol-
lowed by the oldest alarms.
• Alarms are always routed to the destination defined in the send command; call
diversion and call forwarding operations have no effect.
• Several alarm sources can be connected to each PBX.
HBT_20321104_02/B0_en
Command
ATTMAS / AlarmID / internal sub-
scriber number / Text
ATMACA / AlarmID / internal sub-
scriber number
ATMAD / AlarmID / internal sub-
scriber number
Message
ALARM READ'\t'AlarmID'\t'inter-
nal subscriber number
ALARM CONFIRMED'\t'Alar-
mID'\t'internal subscriber number
ALARM DELETED'\t'Alar-
mID'\t'internal subscriber number
ascom Ascotel 2025/2045/2065
Remark / example
Example: "ATMAS / 1 / 208 / Fail-
ure Heating Cellar House 23"
Example: "ATMACA / 1 / 208"
Example: "ATMDA / 1 / 208"
Example
ALARM READ'\t'1'\t'208
ALARM CONFIRMED'\t'1'\t'208
ALARM DELETED'\t'1'\t'208
Features 2.433