Visual Inspections And Function Tests In Normal Operation - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065
2.4 Visual Inspections and Function Tests in Normal
Operation
With the PBX in normal operation, carry out the following visual inspections and
function tests:
• Is the decimal point on the mainboard's 7-segment display flashing regularly?
• Are all the expansion cards registered with the system?
• Are all the individual configurations on the terminals working in accordance
with the planning specifications and the wishes of the customer (key configu-
rations, phone book entries, menus on the terminal's display, output text lan-
guage, ringing tones, hands-free mode, etc.)?
• Is the terminal bus addressing correct?
• Do the displays on all the terminals indicate the idle-state display incl. the time?
• Do you obtain a normal idle tone whenever a terminal is seized?
• Is the LED on the radio unit of the DECT system flashing normally?
• Are the handsets of the DECT system synchronized with the radio units (aerial
symbol on the display of the Ascotel DECT handset)?
6.4 General Checks HBT_20321104_06/B0_en