4.7.3
Break-In (Direct Dialling in for Virtual PISN
Subscribers)
An incoming connection from the outside is routed into the PISN at the PINX clos-
est to the calling party. For this the calling party must know the correct dial-in
number for the PISN. This number can be displayed to him as a CLIP number, for
example when calling from the PISN. Typical break-in applications:
• A company with several different locations wishes to present itself to the out-
side through one location only.
• Traffic from a virtually networked system to other systems in the leased-line
network is always to be routed via the nearest system in the private network.
Kloten
Fig. 1.39:
Break-in: shortest connection from the public network to the PISN
HBT_20321104_01/B0_en
Geneva
PINX 1
PINX 2
PINX 3
Zurich
ascom
Ascotel 2025/2045/2065
Public network
PINX 1
PINX 2
PINX 3
Networking the Systems
PISN
haz0674aaena0
1.53