Clip With Incoming Calls; Analysing And Editing The Clip - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065
3.3

CLIP with Incoming Calls

The CLIP number of an incoming call is processed and presented in two stages:
• Analysis and processing of the CLIP number
• Presentation of the CLIP number on the destination subscriber's terminal
3.3.1

Analysing and Editing the CLIP

The following information is necessary for specifying the CLIP properties in a PISN
correctly. This sub-chapter can be skipped in the case of the configuration of a
stand-alone PBX.
The system analyses and adapts the CLIP number of an incoming call as accurately
as possible so that the CLIP number is always displayed correctly, even in a PISN
For this purpose CLIP number prefixes such as regional prefix, prefix and code are
evaluated, and the type of number adapted.
The tables below show how the system handles the type of number and the CLIP
number of an incoming call.
Tab. 2.9: Handling a CLIP number with NPI-type "PNP" or "unknown"
TON of the CLIP Specific
number Region prefix
Unknown, yes
level 1,
level 2
no
level 0 no
1)
CLIP number has a regional prefix that matches the separate PINX
2.26 Identification Elements
Conversion
1)
Regional prefix is truncated,
TON is set to "level 0".
CLIP number and TON remain unchanged
CLIP number and TON remain unchanged
HBT_20321104_02/B0_en