Configuring The Ip Gateway Aip 6400 - ASCOM Ascotel 2025 System Manual

6.2

Configuring the IP Gateway AIP 6400

The IP Gateway AIP 6400 can be configured from any PC with network access.
The only requirement is that an IP address for the Ethernet interface is configured
on the expansion card. The main page of the configuration appears on the PC
once the IP address has been entered in a conventional commercial web browser
and after authentication by means of user name and password.
Technical Data
The IPI-100BT expansion card is fitted into an expansion slot.
Tab. 1.9: IP Gateway AIP 6400 technical data
Number of VoIP channels per
IPI-100BT expansion card
Number of LAN subscribers per
2)
gatekeeper
LAN connection
Voice data conversion
Voice compression
Signalling conversion
Number of expansion cards of the
type IPI-100BT per PBX
Quality of Service (QoS)
1)
1 primary rate access is taken up on each Gateway interface. This primary rate access is therefore no
longer available as a network interface.
2)
The gatekeeper takes charge of the ringing control as well as address translation and bandwidth man-
agement. Several expansion cards of the type IPI-100BT can be used on each system (LAN and PBX),
although the gatekeeper can only be activated on one card.
LAN subscribers include IP terminals such as IP phones, PC phones on Ethernet. Each expansion card
IPI-100BT on another PBX counts as an IP connection endpoint and covers all the PBX subscribers with
that endpoint.
HBT_20321104_01/B0_en
max. 12
1)
max. 50
Ethernet 10Base-T / 100Base-T with auto-detect
G.723 (LAN) « (ISDN PCM) G.711 (PBX)
ISDN-PCM (PBX) « H.323 (LAN) with G.711 uncompressed or G.723
compressed
Approx. 3.5:1 (with G.723)
Q.931 (PBX) « H.323 (LAN)
2025: Max. 1
2045: Max. 2
2065: Max. 4
802.1 p/Q
ascom Ascotel 2025/2045/2065
Ascotel IP Gateway AIP 6400 1.73