ASCOM Ascotel 2025 System Manual page 387

ascom Ascotel 2025/2045/2065
Settings at the Gateway PINX (PINX 2)
Specifying the transit route
The transit route is specified using the "Transit route" setting. If an incoming call
has a phone number with numbering plan identifier NPI = E.164, it will be for-
warded via the defined route. This route leads to the public network (see also
Page 2.193).
Tab. 2.70: Settings for the break-out routing at the gateway PINX (PINX 2 in Zurich)
Parameter
Transit route:
• Route
Route 4:
• Name
• Trunk groups
• Numbering plan identifier NPI
• Type of number TON
Trunk group 1:
• Name
• Network interfaces
• Network type
• Protocol
• Automatic CLIP
2.210 Call Routing
Parameter value
4 (this route is used for the transit routing)
Zurich, exchange
1
E.164
Unknown
Zurich, ISDN exchange
Network interfaces of this trunk group
Public
DSS1
Yes
HBT_20321104_02/B0_en