Do Not Disturb - ASCOM Ascotel 2025 System Manual

8.2.6

Do not Disturb

To ensure that subscriber B is not disturbed, all incoming calls are automatically
diverted to an alternative destination C, which has to be specified using the sys-
tem configuration.
Fig. 2.168: Do not disturb
Detailed Description
Tab. 2.138: Do not disturb
Inter- Operating sequence / signalling on the terminal Scope
face
B Once the feature has been activated, B obtains
an acknowledgement tone.
C
1)
The settings authorising internetwork traffic need to be observed for PISN subscribers in the public net-
work or on a virtually connected PINX (see "Exchange-to-Exchange Connections",
Page 2.174internetwork connections"). (If the connection is not authorized, the call is not forwarded.)
C is the only subscriber who can still reach subscriber B.
The alternative destination C is valid for the entire system.
A destination for Do not disturb cannot be diverted to the exchange.
Prefix Dialling Procedures
Tab. 2.139: Do not disturb: Procedures
Activate Do not disturb
Clear Do not disturb
HBT_20321104_02/B0_en
ascom
A B
Possible destinations:
• Subscribers: internal, PISN
• Operator Console
Requirement:
C is not protected against calls (Do not disturb,
*26) or call diversion (*02).
*/# procedure
*26
#26
Ascotel 2025/2045/2065
C
haz0222aaxxb0
1)
Features 2.321