Replicating The Name Display In The Pbx - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065
Call via a V.24 Interface
The CLIP numbers are forwarded to the V.24 interface of an Office Pocket
Adapter in the same way as they are displayed on the system terminals.
With transferred calls the CLIP number can be forwarded with the Office Pocket
Adapter via V.24.
3.3.3

Replicating the Name Display in the PBX

The PBX will try to assign a name to the CLIP number of an incoming call from the
public network and to display that name on the system terminal (CNIP). A search
is therefore carried out in the PBX card files for a match for the CLIP number. The
card files are searched in the following sequence:
• PISN subscriber list
• Abbreviated dialling list
• Local card files of the system terminals
A name will be displayed depending on the search result as shown in Fig. 2.12.
CNIP and CONP are supported in the private leased-line network under QSIG.
They are both accepted and do not need to be recreated in the PBX.
2.28 Identification Elements HBT_20321104_02/B0_en