ascom
Ascotel 2025/2045/2065
Re-measuring the Handover Response of the installed System
Radio Units
This method is used for checking a system that is already in operation. Both the
system and the standard handset can be used.
Handover Setting
The "Handover Setting" menu is used for setting the operating mode required for
signalling the switch to another radio unit:
• "Show HO": from "Test" menu
• "
": presents one selection in each case (in succession)
ß
• "None": no indication / signalling for a switch to another radio unit
• "Beep": indication / signalling for switch activated with acoustic signal
• "Disp": indication / signalling for switch activated with indication of the desti-
nation radio unit
• "Both": indication / signalling for switch over activated, with acoustic signal
and indication of the destination radio unit
• "Ok": accept choice and go back to "Test" menu
3.80
Planning DECT Systems
HBT_20321104_03/B0_en