Connection Options - ASCOM Ascotel 2025 System Manual

Note:
PBX systems running ISDN-5.1 can only be configured with AIMS 5.1 or
higher.
The AIMS and PBX versions must be installed for the same sales channel.
If the channel versions of AIMS and PBX do not match, it will not be pos-
sible to configure the PBX via AIMS.
Besides the Configuration Manager, AIMS also features a number of other Man-
agers for related tasks (see "Ascotel Information Management System AIMS",
Page 1.93).
Communication Protocol
The TCP / IP communication protocol is used for communications between PBX
and PC. The PPP protocol is used for serial connections (via V.24 for example). To
be able to set up such a connection, you need to ensure that the appropriate PPP
software is installed on the PC (see "Settings on the PC", Page 5.8).
2.2

Connection Options

Overview of Connection Options
Tab. 5.1: Connection options for configuration with AIMS
Access
Local access (internal)
• via V.24 interface
• via Pocket Adapter
Dial-up access
• internal access
• external access (via the
public network)
LAN (Ethernet)
HBT_20321104_05/B0_en
Connection on the PC
V.24 interface
V.24 interface
ISDN TA or ISDN PC card
ISDN TA or ISDN PC card
Ethernet interface
ascom Ascotel 2025/2045/2065
Connection on the PBX
V.24 interface
AD2 interface
S interface
Network interface
Ethernet interface (on the
basic system)
AIMS Configuration Tool
Effective data trans-
mission rate
approx. 130 kbit/s
approx. 10 kbit/s
64 kbit/s
64 kbit/s
10 Mbit/s
5.3