ascom
Ascotel 2025/2045/2065
Additional Keypad ZTF for Office 30 and Office 40
The ZTF adds 20 configurable keys to an Office 30 or Office 40.
Installation
1. Unplug the terminal cable from the socket.
2. Connect the ZTF's connecting cable with connector X4 through the opening
provided for that purpose (Fig. 4.78).
3. Guide the opening on the ZTF over the column of the Office and allow the
ZTF to snap into place.
4. Fit the supplied column to the ZTF.
5. Screw the ZTF on to the Office.
6. Plug the terminal connecting cable into the socket.
Fig. 4.78:
Installation on the ZTF as shown in the example of the Office 40
If the ZTF is connected to an Office 30 , the LEDs will be lit red. If the ZTF is con-
nected to an Office 40, the LEDs will be lit red and green.
4.112
Installing Terminals
X4
haz0056aaxxa0
HBT_20321104_04/B0_en