ASCOM Ascotel 2025 System Manual page 1058

Besides the normal mode there are also various other modes with their own status
display on the 7-segment display.
Tab. 7.10: Operating state displays other than normal mode (selection)
7-segment display
n n n
1)
A thorough RAM test is carried out when the HEX switch is on position 2. In this case the segments move
up and down slowly.
2)
An overview of error codes can be found in "Output of Error Codes in the PBX", Page 7.73.
HBT_20321104_07/B0_en
Detailed description
All segments lit
Rapidly descending segments
Permanently displayed
Permanently displayed
Rotating segments, forming the figure
"8"
Permanently displayed
Timeout symbol (permanently lit)
Flashing
Descending segments
Rotating segments, forming the letter
"o"
Letter "E" followed by a three-digit fig-
ure and a bar (repeated)
ascom Ascotel 2025/2045/2065
State / Remarks
Display test during startup
RAM test during startup
Start of the startup mode
Preparing to load the system soft-
ware or searching for system soft-
ware
Loading the system software
Action successfully completed
Timeout for turning HEX rotary
switch
Waiting for V.24 transfer
Loading application via V.24
Data transfer to or from a Flash card
An error with error code nnn has
2)
occurred
Operations Supervision
1)
7.59