Creating The Trunk Groups; Creating The Trunk Groups Between The Systems - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065
6.2.2

Creating the Trunk Groups

6.2.2.1

Creating the Trunk Groups between the Systems

Create a trunk group with all the lines between two systems.
1. In system 1 create a trunk group with all the lines to system 2 (trunk group 1-
4) and a trunk group with all the lines to system 3 (trunk group 1-5).
2. In system 2 create a trunk group with all the lines to system 1 (trunk group 2-
4). As there are no lines leading directly to system 3 and there are no other
lines, you do not need to create any other trunk groups.
3. In system 3 create a trunk group with all the lines to system 1 (trunk group 3-
4).
You need to set the trunk groups for a private network:
4. Select the following settings in the trunk group configuration for trunk
groups 4 and 5 of all the systems:
– Network type = private
– Protocol = PSS1
Name the trunk groups as an orientation aid:
5. Name the trunk groups of system 1:
– Trunk group 1-4: Name = PINX 2
– Trunk group 1-5: Name = PINX 3
6. Name the trunk groups of systems 2 and 3:
– Trunk group 2-4: Name = PINX 1
– Trunk group 3-4: Name = PINX 1
3.112 Planning a Private Network HBT_20321104_03/B0_en