Response If Busy; Response If The Call Destination Is Busy - ASCOM Ascotel 2025 System Manual

5.2.2

Response if busy

The following chapter describes how the system responds when busy and how
that response can be influenced using specific settings.
5.2.2.1

Response if the Call Destination is busy

If the call destination is busy, an incoming call will be handled according to the
type of destination. Busy call destinations may be:
• An individual, busy subscriber
• A busy user group
• A busy KT line
• A subscriber with a stored message
• A user group with busy subscribers but without the elements Operator console
and General call.
Within the context of this chapter a call destination is said to be busy if both he
original destination and the alternative destinations, where configured, as busy
(setting "CDE if busy").
Call destination: Individual, busy Subscriber
Call waiting allowed but is rejected
• In the case of an incoming call from the public ISDN network the caller obtains
the congestion tone.
• In the case of an incoming call from the private leased-line network call waiting
is not possible.
• In the case of an incoming call from the public analogue network call waiting
is repeated.
1)
Does not apply to Italy
HBT_20321104_02/B0_en
ascom
1)
Ascotel 2025/2045/2065
Call Routing 2.127