Conference Settings; Conference Activecontrol Mode; Conference Autoanswer Delay; Conference Autoanswer Mode - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Conference settings

Conference ActiveControl Mode

Active control is a feature that allows conference participants to administer a conference on
Cisco TelePresence Server or Cisco Meeting Server using the video system's interfaces.
Each user can see the participant list, change video layout, disconnect participants, etc.
from the interface. The active control feature is enabled by default, provided that it is
supported by the infrastructure (Cisco Unified Communications Manager (CUCM) version
9.1.2 or newer, Cisco TelePresence Video Communication Server (VCS) version X8.1 or
newer, Cisco Media Server (CMS) version 2.1 or newer). Change this setting if you want to
disable the active control features.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Off
Auto: Active control is enabled when supported by the infrastructure.
Off: Active control is disabled.

Conference AutoAnswer Mode

Define the auto answer mode. Use the Conference AutoAnswer Delay setting if you want
the system to wait a number of seconds before answering the call, and use the Conference
AutoAnswer Mute setting if you want your microphone to be muted when the call is
answered.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: You can answer incoming calls manually by pressing the OK key or the green Call
key on the remote control, or by tapping Answer on the Touch controller.
On: The system automatically answers incoming calls, except if you are already in a call.
You can answer or decline incoming calls manually when you are already engaged in a
call.
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Peripherals Maintenance

Conference AutoAnswer Mute

Define if the microphone shall be muted when an incoming call is automatically answered.
Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: The incoming call will not be muted.
On: The incoming call will be muted when automatically answered.

Conference AutoAnswer Delay

Define how long (in seconds) an incoming call has to wait before it is answered
automatically by the system. Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..50)
The auto answer delay (seconds).

Conference CallProtocolIPStack

Select if the system should enable IPv4, IPv6, or dual IP stack on the call protocol (SIP,
H323).
Requires user role: ADMIN
Default value: Dual
Value space: Dual/IPv4/IPv6
Dual: Enables both IPv4 and IPv6 for the call protocol.
IPv4: When set to IPv4, the call protocol will use IPv4.
IPv6: When set to IPv6, the call protocol will use IPv6.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
100
Administrator Guide
System settings System settings Appendices