New and Changed Features
Your phone must be connected to a network and configured to connect to a call control system. The phones
support many functions and features, depending on the call control system. Your phone might not have all
functions available, based on the way your administrator has set it up.
When you add features to your phone, some features require a line button. But each line button on your phone
can support only one function (a line, a speed dial, or a feature). If your phone's line buttons are already in
use, your phone won't display any additional features.
To check which phone model you have, press Applications
number field shows your phone model.
New and Changed Features
New and Changed for Firmware Release 11.1(2)
Feature
Emergency Call Support
Reverse Name Lookup
New and Changed for Firmware Release 11.1(1)
Revision
Adjust Contrast with a slider
Call Recording Support
Instant Message and Presence Contacts
Presence
Call Center Support
XSI Call Logs - Server All Calls menu
New and Changed Features for Firmware Release 11.0(1)
Revision
Configure a line key to perform a speed dial
either with a VID or without a VID
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
2
and select Phone information. The Model
New or Changed Sections
Make an Emergency Call, on page 24
Administrators enable and disable this feature. For
information about this feature, see
Lookup for Incoming and Outgoing Calls, on page
48.
Updated Section
Adjust the Phone Screen Contrast, on page 66
Record a Call, on page 35
Instant Message and Presence Contacts, on page 36
Presence, on page 36
Make a Call to an IM and Presence Contact, on page 36
Change Your Presence State, on page 37
Call Center Features, on page 39
View Your Recent Calls, on page 51
Updated Section
Use the Line in Focus for Speed-Dial Calls, on page 26
Your Phone
Reverse Name