New And Changed Features For Firmware Release 11.0(1) - Cisco 8851 Administration Manual

New and Changed Features for Firmware Release 11.0(1)

Feature
Call Recording
Cisco IP Phone 8845 and 8865 Support
Factory Reset Button in the Phone Web Page
IPv6 Support
Presence
New and Changed Features for Firmware Release 11.0(1)
All new features have been added to
Revision
Added MOS enhancement
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
2
New or Changed Sections
Enable Remote Call Recording with SIP REC, on
page 133
Enable Remote Call Recording with SIP INFO, on
page 135
Call Doesn't Record, on page 284
Configure the Video Codec, on page 45
Video Configuration, on page 255
Video Transmit Resolution Setup, on page 43
Control the Video Bandwidth , on page 144
Video Configuration, on page 245
Disable Video Services , on page 144
Video Configuration, on page 270
Factory Reset the Phone with the Web UI Button,
on page 186
Factory Reset, on page 209
Network Configuration Fields, on page 36
IPv6 Information, on page 201
Network Settings, on page 216
IPv6 Settings, on page 217
Set Up a Phone for Presence, on page 138
Broadsoft XMPP, on page 250
Phone Presence Message: Disconnected from Server,
on page 285
Presence Status Doesn't Work, on page 285
Telephony Features for Cisco IP Phone, on page
Updated Section
• #unique_39
New and Changed Information
155.