Activate Call Forward All With Feature Activation Code Synchronization - Cisco 8832 User Manual

Activate Call Forward All with Feature Activation Code Synchronization

Procedure
Step 1
On the phone web page, click User Login > Voice > User.
Step 2 In the Call Forward section, set the Cfwd All, Cfwd Busy, Cfwd No Answer, or combination of them to
Yes, and enter a phone number for each of the call forward services that you want to enable:
• Cfwd All/Cfwd All Dest—Forwards all calls.
• Cfwd Busy/Cfwd Busy Dest—Forwards calls only if the line is busy.
• Cfwd No Answer/Cfwd No Ans Dest—Forwards calls only if the line is not answered.
• Cfwd No Answer/Cfwd No Ans Delay—Assigns a response delay time in seconds.
Step 3
Click Submit All Changes.
Activate Call Forward All with Feature Activation Code Synchronization
When you press the Forward or Forward all softkey, the Call forward all screen displays and it allows you
to set up your phone to forward all calls.
Before you begin
Your administrator enables a feature activation code that synchronizes the phone with a server to forward all
calls.
Note
Procedure
Step 1
Press Forward or Forward all
Step 2 Do any of the following:
• Enter the target number, to which you want to forward incoming calls from this phone line.
• Press Contacts and select a contact from your contact directories.
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
38
If your administrator disables the feature key synchronization (FKS) and XSI sync for call forward on
your phone, you can enter the value as number of seconds after which a call is forwarded.
If your administrator enables feature key synchronization (FKS) or XSI sync for call forward on your
phone, you can enter the value as number of rings after which a call is forwarded.
The call forward settings on the phone web page take effect only when FKS and XSI are disabled. For
more information, consult your administrator.
The Feature Activation Code Synchronization feature only supports the Call Forward All service. The
Call Forward Busy and the Call Forward No Answer services are not supported.
When your administrator enables the feature activation code for the synchronization, the screen Call
forward settings is ready-only.
Calls