Call Forward Deactivation By Using Star Codes; Setting Do Not Disturb; Enabling Do Not Disturb - Cisco SPA50 Series User Manual

Hide thumbs Also See for SPA50 Series:

Table of Contents

Using Basic Call Management Functions

STEP 1

STEP 2

STEP 3

STEP 4

Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide

Call Forward Deactivation by using Star Codes

Enter *73 to deactivate call forwarding all.

Enter *91 to deactivate call forward busy.

Enter *93 to deactivate call forward no answer.

Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.

If you have voice mail configured, incoming callers can be immediately routed to

voice mail. If voice mail is not configured, callers will hear a busy signal or a

message.

You can also set Do Not Disturb from your PC by using the web configuration

utility.

For the Cisco SPA501G, you can only set Do Not Disturb in the web configuration

utility or set

Do Not Disturb by using the Star

Do Not Disturb Softkey

To activate Do Not Disturb, press the dnd softkey. The IP phone screen indicates

that Do Not Disturb is turned on for your phone (except on the Cisco SPA501G).

Do Not Disturb by using the Star Code

Enter *78 to activate Do Not Disturb. Enter *79 to deactivate Do Not Disturb. On the

Cisco SPA501G, the Message Indicator Light blinks red when Do Not Disturb is

enabled.

Do Not Disturb by using Setup

To access Do Not Disturb:

Press the Setup button and select Preferences > Do Not Disturb.

Press the edit softkey.

Press y/n and choose y.

Press ok.

Code.

Table of Contents