Remove The Feature Configured On A Line Key; Add A Menu Shortcut To A Line Key - Cisco 7800 Series User Manual

Remove the Feature Configured on a Line Key

Note
If your administrator has configured a BLF list for you, you can select the user whose line you want to monitor
from the list:
a) Select Search BLF list.
Users whose names appear in grey in the list are ones that your phone is already monitoring on individually
configured BLF keys.
b) Select the user whose line you want to monitor.
The user ID appears in the User ID field.
If you select a user who is already monitored on an individually configured key, the new configuration
overrides the previous configuration to monitor the user.
Step 4 Press Save.
Remove the Feature Configured on a Line Key
You can remove the feature configured on a line key.
If your phone is monitoring a Busy Lamp Field (BLF) list, removing the feature configured on a line key
makes the line key available for monitoring the BLF list. This can change the positions of BLF list keys. See
Activate or Deactivate Monitoring of the BLF List, on page 16
Note
Procedure
Step 1
Press and hold down the line key for two seconds.
Step 2 On the Select feature screen, select None.
Step 3
When prompted to confirm, press OK.

Add a Menu Shortcut to a Line Key

After you configure a line key with a menu shortcut, you can open the menu with a simple press on the line
key.
Before you begin
Your administrator must enable this feature on your phone.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
18
You must enter the user ID. The user ID may not be the person's name or extension. Consult your
administrator if you need assistance.
You cannot remove some features configured by your administrator.
for details.
Your Phone