Configure A Phone To Accept Pages Automatically; Server-Configured Paging - Cisco 7800 Series Administration Manual

Configure a Phone to Accept Pages Automatically

Procedure
Step 1
Select Voice > Provisioning.
Step 2 In the Problem Report Tool section, set the fields as described in the
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code. Enter the
string in this format:
<PRT_Upload_Rule ua="na">
http://64.101.234.132:8000//Users/abcd/uploads/prt/test-prt.tar.gz
</PRT_Upload_Rule>
<PRT_Upload_Method ua="na">POST</PRT_Upload_Method>
<PRT_Max_Timer ua="na">20</PRT_Max_Timer>
Step 3 Click Submit All Changes.
Configure a Phone to Accept Pages Automatically
The Single Paging or Intercom feature enables a user to directly contact another user by phone. If the phone
of the person being paged has been configured to accept pages automatically, the phone does not ring. Instead,
a direct connection between the two phones is automatically established when paging is initiated.
Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > User.
Step 2
In the Supplementary Services section, choose Yes for the Auto Answer Page field.
Step 3 Click Submit All Changes.

Server-Configured Paging

You can configure a paging group on a server so that users can page a group of phones. For more details,
refer to your server documentation.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
182
Problem Report Tool, on page
Access the Phone Web Page, on page
Cisco IP Phone Administration
254.
80.