Setting up Measurement Conditions and Display
Selecting Measurement Time
Selecting Measurement Time
Measurement time of 1, 2, 4, 6 and 8 are available in E4981A.
For details on the actual measurement time, refer to
page
Setup procedure
Step 1.
Press [Meas Setup].
Step 2.
Use the cursor keys to select the MEAS TIME field.
Step 3.
Use the numeric keys or following softkeys:
Softkey
INCR+
DECR-
Selecting Cable Length
Set up the length of the measurement cable to compensate errors due to the
extension of the measurement cable. The E4981A lets you select the length
from 0 m, 1 m, or 2 m, depending on the measurement cable you use.
0 m
1 m
2 m
Setup procedure
For details on setup procedure, refer to
Cable length information is saved in internal FLASH memory when power is
OFF with backup function enabled.
58
188.
Description
Increments the measurement time.
Decrements the measurement time.
When you do not use the test lead (in other words, when you
connect the test fixture directly to the UNKNOWN terminal).
When you use the
When you use the
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
"Measurement time" on
16048A/B
Keysight
Keysight
16048D test lead.
Keysight
"Setting up cable length" on page
test lead.
43.