Turning On/Off Comparator Function; Setup Procedure - Keysight E4981A User Manual

Sorting Based on Measured Results (Comparator Function)

Turning ON/OFF Comparator Function

Turning ON/OFF Comparator Function
The ON/OFF state of the comparator function also controls the ON/OFF state
of the output of the handler interface signal.

Setup procedure

Step 1. Press [Meas Setup].
Step 2. Press the LIMIT TABLE softkey.
Step 3. Use the cursor keys to select the COMP field.
Step 4. Use the following softkeys:
Softkey
ON
OFF
122
Function
Turns ON the comparator function.
Turns OFF the comparator function.
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter