Setting up Measurement Conditions and Display
Saving/Recalling Instrument Setup State (Save/Recall Function)
Using a hard key to recall states from the internal memory
You can also recall configuration states from a particular register in the internal
memory by pressing one of the following hard keys:
Hard key
Recall A
Recall B
Saving/Recalling instrument configuration states into/from USB memory
Figure 4-6
corresponding to them.
Figure 4-6
CATALOG page (when saving instrument configurations into USB memory)
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Description
Recalls configuration states from register 0 (#0 in the No. field).
Recalls configuration states from register 1 (#1 in the No. field).
shows the fields available on this page along with the softkeys
83