Checking The Lan Connection Status; To Reconnect To The Network - Keysight E4981A User Manual

Setting up Measurement Conditions and Display
Configuring the LAN IP Address

Checking the LAN connection status

You can check the CURRENT LAN STATUS monitor area to see the LAN
connection status of the E4981A. The status is expressed as one of the
following:
Table 4-7 LAN connection status
Status
NORMAL
FAILED
IDENTIFY

To reconnect to the network:

Step 1. Press [System].
Step 2. Press the SYSTEM CONFIG softkey.
Step 3. Press the RESTART NETWORK softkey on the IP CONFIG field, MANUAL IP
ADDR field, MANUAL SUBNET MASK field, or MANUAL GATEWAY field.
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Description
LAN connection is OK.
Disconnected from the LAN or LAN connection has failed.
LAN connection is being initialized.
75