Table of Contents
Advertisement
Setting up Measurement Conditions and Display
Configuring the System Date
Configuring the System Date
Functional description
The E4981A features a built-in clock.
Configure the system date after
To configure the system date:
Step 1.
Press [System].
Step 2.
Press the SYSTEM CONFIG softkey.
Step 3.
Use the cursor keys to select the DATE/TIME field.
Step 4.
Use the following softkey:
Softkey
DATE
TIME
Step 5.
If you have selected the date field, use the following keys to edit the year,
month, and day. If you have selected the time field, proceed to
Softkey
YEAR
MONTH
DAY
Step 6.
Enter the year/month/day using the softkeys or entry keys. If you use the entry
keys to enter the value, the softkey labels change to unit labels (x1).
Softkey
YEAR INCR+
YEAR DECR-
MONTH INCR+
MONTH DECR-
DAY INCR+
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
"Configuring the Time Zone" on page
Description
Selects the date field so that you can change the year, month, and day.
Selects the time field so that you can change the hour, minute, and
seconds digit.
Description
Allows you to change the year digit.
Allows you to change the month digit.
Allows you to change the day digit.
Description
Increments the year in steps of 1.
Decrements the year in steps of 1.
Increments the month in steps of 1.
Decrements the month in steps of 1.
Increments the day in steps of 1.
70.
.
Step 7
71
Advertisement
Table of Contents
