Viewing Power Vs Time Measurement Results; Example Of One-Button-Measurement - Power Vs Time - Keysight X Series Manual

Making WLAN Measurements
Making Power vs Time Measurements

Viewing Power vs Time Measurement Results

This measurement provides two views:
— Burst View includes two windows: RF Envelope window showing signal
— Rise & Fall View includes three windows: Rising RF Envelope window,
For more information on what these data are, see the N9077A & W9077A
WLAN Measurement Application User's and Programmer's Reference.
Click to Go Back to

Example of One-Button-Measurement - Power vs Time

This example assumes the signal is correctly applied to the input.
Step 1. Press Mode Preset
Step 2. Press Meas, Power vs Time
Step 3. View the measurement default view. (See
Figure 2-18 Power vs Time (Burst View - Default View)
Keysight WLAN Measurement Guide
waveform trace in yellow and ramp-up/ramp-down lines in blue and Result
Metrics window showing mean power, burst width, power-on/power-don
ramp results.
Falling RF Envelope window and Numeric Results window.
"Making Power vs Time Measurements" on page
Figure 2-18).
47.
49