Connecting The Dut (Capacitor) - Keysight E4981A User Manual

Getting Started
Learning Basic Measurement Procedure

Connecting the DUT (capacitor)

Mount a capacitor on the test fixture. The measurement result for the
parameter selected in "Setting up measurement parameters" on page 40 is
displayed. Figure 3-13 shows an example when the primary parameter is Cp
and the secondary parameter is D.
Figure 3-13 Measurement result display screen (when primary parameter is Cp and
secondary parameter is D)
50 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter