Disconnecting From The Supply Source - Keysight E4981A User Manual

Unpacking and Preparation
Starting the E4981A

Disconnecting from the supply source

The plug attached to the power cable (on the power outlet side or device side
of the cable) serves as the disconnecting device (device that cuts off the power
supply) of the E4981A. When the power supply must be cut off to avoid such
danger as electric shock, pull out the power cable's plug (on the power outlet
side or device side of the cable).
To allow this operation to be performed smoothly, be sure to follow the
guidelines in
for immediate disconnection of the power cable in case of emergency" on
page
When turning the power OFF under normal circumstances, always follow
the methods described in
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
"Ensuring adequate free space around the capacitance meter
15.
"Turning the power OFF" on page 20.
21